Also, always change the pre-filter first unless recently changed and restart the machine. If the alert continues, change the main filter. The machine will warn you with audible and visible alerts if a filter is exhausted see control system. The graphic display will flash the icons of the filters which may need attention. Take care when removing main filters as they are heavy.
Always wear the protective gloves and mask provided and dispose of with the used filters in the bag provided. Protective eyewear should also be worn when changing filters. To remove the pad, first remove the main filter and turn it over See Changing the main filter.
Remove the pad and replace it with a new one. Make sure the harder, smoother side of the pad is facing the main filter. PVC machines also have an adsorbent pad in the base of the machine underneath the Labyrinth filter. This should be replaced at the same time as the Labyrinth filter. It is also good practice to wipe the inside of the machine periodically with a cloth to avoid build up of liquid.
Suitable protective clothing should always be worn. The Labyrinth bag is removed by pulling the filter off the air inlet inside the machine. Make sure the harder, smoother side of the pad is facing the bottom of the tray. The bag filter can also be removed and replaced at this point if required.
If a fuse has to be replaced it is important that this procedure is followed to ensure safe and efficient operation of the Purex unit. Warning status — is an audible chime every 20 seconds and the keypad flashing red every 10 seconds. This stage allows the operator time to identify the problem and take appropriate action e. Alarm status — is an audible chime and the keypad flashing red every 1 second. At this point the problem should be identified and remedial action taken immediately.
Therefore the machine icons may vary depending on the type of machine you have. Change the pre-filter. This is a sealed unit. Contact your supplier for a replacement exhaust monitor unit. The thermal cutout on the blower may have engaged.
Check the cooling vents both inside and out. Switch off mains power and allow the blower to cool. If this does not remedy the fault please contact your supplier. Check all cables and connections and ensure the power supply matches the requirements of the machine.
Check all fuses and circuit breakers. Check all cables and connections are correct. The control PCB inside the machine may have developed a fault. Check all cables and connections first. Then contact your supplier.
Some of these machines incorporate an inverter which connects the control PCB and the power supply to the blower. This inverter and its connections should also be inspected if electrical faults occur. The Purchaser shall be responsible to Purex for ensuring the accuracy of the terms of any order, including any applicable specification, submitted by the Purchaser, and for giving to Purex any necessary information relating to the Goods or Services within a sufficient time to enable Purex to perform the Contract in accordance with its terms.
Should an order be cancelled by the Purchaser within 2 months of the relevant delivery date Purex reserves the right to impose a reasonable cancellation charge. In the case of any breach of warranty then Purex shall at its option remedy such defects or refund such sums as the Purchaser has paid to Purex in respect of such Goods.
Purex shall be under no liability under the above warranties:. In such events Purex may, without liability to the Customer, reasonably vary the terms of the Contract including but not limited to extending the time for performing the contract by a period of at least equal to the time lost due to such an event.
Digital Manual Download Click the download button for the English only manual or use the translate button at the top of the page. Spare parts when requesting spares please quote the model and serial number of your system.
They should be worn when removing filters and disposed of with the used filter in the bag which is also provided. Filters are manufactured from non-toxic materials.
Filters and prefilters are not re-usable and no attempt should be made to clean them. Used filters and prefilters should be disposed of in accordance with local laws and regulations.
The company and its agents disclaim all liability and responsibility for any harm, damage, contamination or injury caused by inappropriate or unlawful disposal. Purex systems use high pressure pumps, which may cause inferior filters to burst, allowing hazardous fumes into the Do not use filters that have only been tested to BS, BS or ASC as these standards are flow checks only and are designed to test filters used in general dust extraction and air conditioning.
Consult the local regulations concerning fume extraction systems, as these may be subject to requirements including; periodic checks by authorised agencies, re-issue of certificates of compliance or equivalents etc. Consult your supplier if in doubt. Consult your supplier for information on maintenance agreements that will ensure conformance to local regulations.
Circuit breaker tripped or fuse blown May indicate a serious fault. Consult your supplier. Hose connection Incorrect connection or layout of hose can cause poor airflow, blockages and potentially dangerous build up of fume. AVI and. JPG files can be copied from the camera to the local fixed-disk within the computer. When accessing the on-camera directory structure be careful not to delete any files or folders. Use the camera to delete any unwanted video clips.
Direct editing of the video files is not possible because the non-liner video editor Kino cannot, as of this writing, open the. AVI files. An attempt to transcode the MPEG4 AVI files to DV-AVI, using the utility ffmpeg resulted in a file that could be opened by Kino though marred by the loss of the audio stream; the problem seems to be one of selecting the correct options. Not Panicking Ltd is not responsible for the content of external internet sites.
The views expressed are theirs and unless specifically stated are not those of the Not Panicking Ltd. Unlike Edited Entries, Entries have not been checked by an Editor. If you consider any Entry to be in breach of the site's House Rules , please register a complaint. Last Mentions. Record updated: Mar Sector: Communications. Year Founded: Capital Raised: Share a company with a colleague. Company name is read-only, enter changes below to Address or Add'l Information.
Pure Digital Technologies. Group Member. Free 30 Day Trial Account.
0コメント